Print Tattoo Paper

Firstly, print the tattoo paper using the Epson L805 printer, which is recommended.Choose standard plain paper and mirror printing. After printing, if the paper is damp, please use a hairdryer to dry the surface before proceeding.

Apply Transfer Film

Cut out the printed tattoo paper, then peel off the silicone paper attached to the adhesive film.Place the pattern side down and press firmly to ensure the adhesive film adheres closely to the pattern. Use a hard card to evenly and firmly scrape the surface.

Peel off the transfer film and apply it onto the skin

Trim the edges of the pattern along with the silicone paper. Peel off the transparent base film and allow the tattoo sticker to fightly adhere to the skin. Gently press the pattern to ensure it adheres closely to the skin.

Moisten and peel off the base paper

Press with a wet cloth until the backing paper changes color.Gently tap the backing paper until it can be removed, then slowly peel off the backing paper to complete the tattoo transfer. (Note: The wet cloth should be slightly moist, not too wet.)

Fix Pattern

After transfer, gently pat the pattern with your hand to make it adhere more closely to the skin for a more realistic and durable appearance. Do not rush to rinse with water or rub vigorously after transfer. The tattoo sticker pattern can last for up to two days.

●Do NOT transfer tattoos on sensitive skin such as eyes and lips. Suggest you do a skin sensitivity test with a small image.

●Do NOT to be applied on damaged or broken skin.
●This is rub-on tattoo which will be removed after washing, bathing, scrubbing, or rubbing by clothes.

●Please don't attach the tattoo on the frequently bent area such as joints or it will fall off easily.

●Storage: Please store the paper in a tightly sealed plastic bag in a cool and dry place.